Sea-Doo 2010~17 RXT/GTX Watercraft Cover - Black/Grey
Sea-Doo 2010~17 RXT/GTX Watercraft Cover is a versatile lineup of watercraft covers. With its weather-resistant material, its solution-dyed fabric offers easy handling and increased UV resistance. Strapless design provides easy installation and side hooks secure the cover while trailering. Patented air release vent system for trailering. Soft inner lining prevents panel abrasion. Zippered openings allow easy access to mooring cleats. With all its special features it is an ideal cover for your watercraft.
Standard on GTX LTD models.
Not compatible with iS/aS suspension deck models.
Key Features:
- Weather-resistant trailering cover protects your watercraft during storage and transportation.
- Made of heavy-duty UV-resistant solution-dyed polyester canvas.
- Soft inner lining prevents panel abrasion.
- Yellow fabric indicates handle insertion points.
- Zippered openings allow easy access to mooring cleats.
- Areas prone to higher wear are reinforced with a layer of double canvas.
- A perfect fit for your watercraft, with or without installed Sea-Doo accessories.
- Side hooks secure the cover while trailering.
- Patented air release vent system for trailering.
See our installation guide below.
FREE USA SHIPPING
on orders over $150
WE SHIP
worldwide

- 2017 Sea-Doo GTX 155 (iBR)
- 2017 Sea-Doo GTX Limited 300
- 2017 Sea-Doo GTX S 155 (iBR)
- 2017 Sea-Doo RXT 260 (iBR)
- 2017 Sea-Doo RXT-X 300
- 2016 Sea-Doo GTX 155 (iBR)
- 2016 Sea-Doo GTX Limited (215)
- 2016 Sea-Doo GTX Limited 300
- 2016 Sea-Doo GTX S 155 (iBR)
- 2016 Sea-Doo RXT 260 (iBR)
- 2016 Sea-Doo RXT-X 300
- 2015 Sea-Doo GTX 155 (iBR)
- 2015 Sea-Doo GTX Limited (215)
- 2015 Sea-Doo GTX S 155 (iBR)
- 2015 Sea-Doo RXT 260 (iBR)
- 2015 Sea-Doo RXT-X 260 (iBR)
- 2014 Sea-Doo GTX 155 (iBR)
- 2014 Sea-Doo GTX Limited (215)
- 2014 Sea-Doo GTX S 155 (iBR)
- 2014 Sea-Doo RXT 260 (iBR)
- 2014 Sea-Doo RXT-X 260 (iBR)
- 2013 Sea-Doo GTX 155 (iBR)
- 2013 Sea-Doo GTX 215 (iBR)
- 2013 Sea-Doo GTX S 155 (iBR)
- 2013 Sea-Doo RXT 260 (iBR)
- 2013 Sea-Doo RXT-X 260 (iBR)
- 2012 Sea-Doo GTX 155 (iBR)
- 2012 Sea-Doo GTX 215 (iBR)
- 2012 Sea-Doo GTX S 155 (iBR)
- 2012 Sea-Doo RXT 260 (iBR)
- 2012 Sea-Doo RXT-X 260 (iBR)
- 2011 Sea-Doo GTX 155 (iBR)
- 2011 Sea-Doo GTX 215 (iBR)
- 2011 Sea-Doo RXT 260 (iBR)
- 2011 Sea-Doo RXT-X 260 (iBR)
- 2010 Sea-Doo GTX 155 (iBR)
- 2010 Sea-Doo RXT 215 (iBR)
- 2010 Sea-Doo RXT-X 260 (iBR)
How to Install a Watercraft Cover
Installing your new watercraft cover doesn't have to be a challenge. Follow these simple steps and you'll look like a pro every time!
- Make sure you received the correct cover for your year, make & model before removing it from the box!
- Open the cover and identify the front and back.
- Install the cover over the handlebars ensuring both hand grips are snug inside their respective pockets.
- At the front of your craft, pull the edge of the cover over the front bumper completely.
- At the rear of your craft, pull the edge of one corner of the cover over a corner rub rail cap. Do the same for the remaining corner.
- If equipped, secure the plastic clips along the edge of your cover to the rub rails on each side of the craft.
After installing your new watercraft cover a few times it will become more compliant, making it easier to install and remove. Over time you may need to adjust the tension of the integrated bungee cord (at front) that draws the cover to the hull at its edge.
Validate your login