Sea-Doo 2020+ GTI, GTR & Wake 170 Watercraft Cover - Black
Sea-Doo 2020+ GTI, GTR & Wake 170 Watercraft Cover is weather-resistant and durable. It is made of heavy-duty UV-resistant solution-dyed polyester canvas. Soft inner lining helps with preventing panel abrasion. Easy access zippered openings give access to mooring cleats, glove box, front storage and for refueling. Accommodating LinQ accessories on the rear deck with the cover in place. Patented air release vent system is built in for trailering along with side hooks to secure the cover while trailering. A perfect fit for your watercraft, with or without installed Sea-Doo accessories.
Key Features:
- Weather-resistant trailering cover for storage and trailering.
- Heavy-duty UV-resistant solution-dyed polyester canvas.
- Soft inner lining prevents panel abrasion.
- Yellow fabric indicates handle insertion points.
- Zippered openings allow easy access to mooring cleats.
- Zippered opening permits easy access to the glove box, front storage and for refueling.
- Zippered opening accommodates LinQ accessories on the rear deck with the cover in place.
- Patented air release vent system for trailering.
- Side hooks secure the cover while trailering.
- Areas prone to higher wear are reinforced with a layer of double canvas.
See our installation guide below.
FREE USA SHIPPING
on orders over $150
WE SHIP
worldwide

- 2025 Sea-Doo GTI SE 130 (iBR)
- 2025 Sea-Doo GTR-X 300
- 2024 Sea-Doo GTI 130 (iBR)
- 2024 Sea-Doo GTI SE 130 (iBR)
- 2024 Sea-Doo GTI SE 170
- 2024 Sea-Doo GTR 230
- 2024 Sea-Doo GTR-X 300
- 2024 Sea-Doo Wake 170
- 2023 Sea-Doo GTI 130 (iBR)
- 2023 Sea-Doo GTI SE 130 (iBR)
- 2023 Sea-Doo GTI SE 170
- 2023 Sea-Doo GTR 230
- 2023 Sea-Doo Wake 170
- 2022 Sea-Doo GTI 130 (iBR)
- 2022 Sea-Doo GTI 90
- 2022 Sea-Doo GTI SE 130 (iBR)
- 2022 Sea-Doo GTI SE 170
- 2022 Sea-Doo GTR 230
- 2022 Sea-Doo Wake 170
- 2021 Sea-Doo GTI 130 (iBR)
- 2021 Sea-Doo GTI 90
- 2021 Sea-Doo GTI SE 130 (iBR)
- 2021 Sea-Doo GTI SE 170
- 2021 Sea-Doo GTR 230
- 2021 Sea-Doo Wake 170
- 2020 Sea-Doo GTI 90
- 2020 Sea-Doo GTI SE 130 (iBR)
- 2020 Sea-Doo GTI SE 170
- 2020 Sea-Doo GTR 230
- 2020 Sea-Doo Wake 170
How to Install a Watercraft Cover
Installing your new watercraft cover doesn't have to be a challenge. Follow these simple steps and you'll look like a pro every time!
- Make sure you received the correct cover for your year, make & model before removing it from the box!
- Open the cover and identify the front and back.
- Install the cover over the handlebars ensuring both hand grips are snug inside their respective pockets.
- At the front of your craft, pull the edge of the cover over the front bumper completely.
- At the rear of your craft, pull the edge of one corner of the cover over a corner rub rail cap. Do the same for the remaining corner.
- If equipped, secure the plastic clips along the edge of your cover to the rub rails on each side of the craft.
After installing your new watercraft cover a few times it will become more compliant, making it easier to install and remove. Over time you may need to adjust the tension of the integrated bungee cord (at front) that draws the cover to the hull at its edge.
Validate your login