Sea-Doo 2011~19 GTS, GTI, GTI SE & GTI Limited Watercraft Cover - Black/Grey
Sea-Doo 2011~19 GTS, GTI, GTI SE & GTI Limited Watercraft Cover comes complete as a versatile lineup of watercraft covers. With Solution-dyed fabric and increased UV resistance materials. It's weather-resistant and protects your watercraft during storage and transportation. Strapless design provides easy installation and the soft inner lining prevents panel abrasion. The cover has a patented air release vent system for trailering and zippered openings to allow easy access to mooring cleats. Side hooks keep the cover secure while traveling. It's a perfect fit for your watercraft, with or without installed Sea-Doo accessories.
Key Features:
- Weather-resistant trailering cover protects your watercraft during storage and transportation.
- Made of heavy-duty UV-resistant solution-dyed polyester canvas.
- Soft inner lining prevents panel abrasion.
- Yellow fabric indicates handle insertion points.
- Zippered openings allow easy access to mooring cleats.
- Areas prone to higher wear are reinforced with a layer of double canvas.
- Side hooks secure the cover while trailering.
- Patented air release vent system for trailering.
See our installation guide below.
FREE USA SHIPPING
on orders over $150
WE SHIP
worldwide

- 2019 Sea-Doo GTI 130 (iBR)
- 2019 Sea-Doo GTI 90
- 2019 Sea-Doo GTI Limited 155 (iBR)
- 2019 Sea-Doo GTI SE 130 (iBR)
- 2019 Sea-Doo GTI SE 155 (iBR)
- 2018 Sea-Doo GTI 90
- 2018 Sea-Doo GTI Limited 155 (iBR)
- 2018 Sea-Doo GTI SE (iBR)
- 2018 Sea-Doo GTI SE 130 (iBR)
- 2018 Sea-Doo GTI SE 155 (iBR)
- 2018 Sea-Doo GTS (90)
- 2017 Sea-Doo GTI 90
- 2017 Sea-Doo GTI Limited 155 (iBR)
- 2017 Sea-Doo GTI SE (iBR)
- 2017 Sea-Doo GTI SE 130 (iBR)
- 2017 Sea-Doo GTI SE 155 (iBR)
- 2017 Sea-Doo GTS (90)
- 2016 Sea-Doo GTI 130 (iBR)
- 2016 Sea-Doo GTI Limited 155 (iBR)
- 2016 Sea-Doo GTI SE 130 (iBR)
- 2016 Sea-Doo GTI SE 155 (iBR)
- 2016 Sea-Doo GTS 130 (iBR)
- 2015 Sea-Doo GTI 130 (iBR)
- 2015 Sea-Doo GTI Limited 155 (iBR)
- 2015 Sea-Doo GTI SE 130 (iBR)
- 2015 Sea-Doo GTI SE 155 (iBR)
- 2015 Sea-Doo GTS 130 (iBR)
- 2014 Sea-Doo GTI 130 (iBR)
- 2014 Sea-Doo GTI Limited 155 (iBR)
- 2014 Sea-Doo GTI SE 130 (iBR)
- 2014 Sea-Doo GTI SE 155 (iBR)
- 2014 Sea-Doo GTS 130 (iBR)
- 2013 Sea-Doo GTI 130 (iBR)
- 2013 Sea-Doo GTI Limited 155 (iBR)
- 2013 Sea-Doo GTI SE 130 (iBR)
- 2013 Sea-Doo GTI SE 155 (iBR)
- 2013 Sea-Doo GTS 130
- 2012 Sea-Doo GTI 130 (iBR)
- 2012 Sea-Doo GTI Limited 155 (iBR)
- 2012 Sea-Doo GTI SE 130 (iBR)
- 2012 Sea-Doo GTI SE 155 (iBR)
- 2012 Sea-Doo GTS 130
- 2011 Sea-Doo GTI SE 130 (iBR)
- 2011 Sea-Doo GTI SE 155 (iBR)
- 2011 Sea-Doo GTS 130
How to Install a Watercraft Cover
Installing your new watercraft cover doesn't have to be a challenge. Follow these simple steps and you'll look like a pro every time!
- Make sure you received the correct cover for your year, make & model before removing it from the box!
- Open the cover and identify the front and back.
- Install the cover over the handlebars ensuring both hand grips are snug inside their respective pockets.
- At the front of your craft, pull the edge of the cover over the front bumper completely.
- At the rear of your craft, pull the edge of one corner of the cover over a corner rub rail cap. Do the same for the remaining corner.
- If equipped, secure the plastic clips along the edge of your cover to the rub rails on each side of the craft.
After installing your new watercraft cover a few times it will become more compliant, making it easier to install and remove. Over time you may need to adjust the tension of the integrated bungee cord (at front) that draws the cover to the hull at its edge.
Validate your login