RIVA Sea-Doo 2012~20 RXP-X 300/260 & 2017~19 GTR-X 230 Seat Cover

How to Install a Watercraft Cover
Installing your new watercraft cover doesn't have to be a challenge. Follow these simple steps and you'll look like a pro every time!

1. Make sure you received the correct cover for your year, make & model before removing it from the box!
2. Open the cover and identify the front and back.
3. Install the cover over the handlebars ensuring both hand grips are snug inside their respective pockets.
4. At the front of your craft, pull the edge of the cover over the front bumper completely. 
5. At the rear of your craft, pull the edge of one corner of the cover over a corner rub rail cap. Do the same for the remaining corner.
6.  If equipped, secure the plastic clips along the edge of your cover to the rub rails on each side of the craft.

After installing your new watercraft cover a few times it will become more compliant, making it easier to install and remove. Over time you may need to adjust the tension of the integrated bungee cord (at front) that draws the cover to the hull at its edge.