BRISK Multi-Spark Plug Sea-Doo 300 Engines
Brisk Multi-Spark Spark Plugs are designed to deliver 3 simultaneous sparks without any modifications to your ignition system. This unique patented design is beneficial for high performance and racing applications, and everyone who is seeking more full and complete combustion cycle as there is no shrouding of the sparks.
By having the Multiple Sparks unshrouded, the multi-spark spark plugs have direct access to the fuel / air mixture which produces a more spontaneous and rapid flame propagation. This improves engine efficiency as there are less imperfectly ignited cycles (reduction in emissions from unburnt fuels/air) which is beneficial for racing and performance as well as a producing an economically friendly product. See our video demonstration for a real life view of how this product works.
Brisk Premium Multi-spark plugs are an entirely new and patented type of high performance spark plug. The spark plug name describes exactly what the spark plug is all about: multiple sparks. The spark plug have no traditional so called "J-gap" ground electrode, instead, there are two auxilary ring shape electrodes bonded to the surface of the ceramic insulator. Since the ring shape electrodes are conductive, they split one very large gap into 3 smaller gaps for the sparks to occur. Since the Multi-spark plug 3 gaps are in series, the spark has to jump three times in order to get from the center electrode to the ground (the spark plug shell), as this is the path of the least resistance.
This means that if your vehicle is equipped with a multi-spark ignition system such as Accel, Crane, Mallory or MSD, you will have 3 times as many sparks on the tip of the sprak plug than your ignition system generate. For example with MSD multi-spark ignition system you will get 9 sparks per every single primary ignition pulse until abut 3,000 RPM when the multi-spark ignition system switch into a single spark mode. But even than you will still get 3 sparks with the Brisk Premium Multi-spark plug, just as you will with a standard OE (original equipment) ignition system in ordinary cars, motorcycles and such.
Note: Solid tip plug. For use with Sea-Doo 300 Models
Features
-
Continuous spark gap over entire circumference 360°.
-
Extremely long flash over.
-
Laser deposited electrodes.
-
Lower voltage consumption
-
No gaping necessary
-
Minimum 3 point arc design
Parameters:
-
Thread Diameter 12mm
-
Thread Reach 19mm-3/4"
-
Hexagon 16mm-5/8"
-
Seat Type Gasket
-
Design Multi-Spark
-
Resistor Yes
-
Projected Yes
- Heat Range - 08
Applications
-
Cars with unleaded, race or Nitrous fuel.
-
Race high revving engines
-
Lower boost Turbocharged or Supercharged engines
-
Modern design vehicles
Service life
-
Up to 20 000 km or 12 000 miles
-
Up to 25 racing hours
FREE USA SHIPPING
on orders over $150
WE SHIP
worldwide

- 2025 Sea-Doo GTR-X 300
- 2024 Sea-Doo GTX 300
- 2024 Sea-Doo GTX Limited 300
- 2023 Sea-Doo GTX 300
- 2023 Sea-Doo GTX Limited 300
- 2023 Sea-Doo RXT-X 300
- 2022 Sea-Doo GTX 300
- 2022 Sea-Doo GTX Limited 300
- 2022 Sea-Doo RXT-X 300
- 2021 Sea-Doo GTX 300
- 2021 Sea-Doo GTX Limited 300
- 2021 Sea-Doo RXT-X 300
- 2020 Sea-Doo GTX Limited 300
- 2020 Sea-Doo RXP-X 300
- 2020 Sea-Doo RXT-X 300
- 2019 Sea-Doo GTX Limited 300
- 2019 Sea-Doo RXP-X 300
- 2019 Sea-Doo RXT-X 300
- 2018 Sea-Doo GTX Limited 300
- 2018 Sea-Doo RXP-X 300
- 2018 Sea-Doo RXT-X 300
- 2017 Sea-Doo GTX Limited 300
- 2017 Sea-Doo RXP-X 300
- 2017 Sea-Doo RXT-X 300
- 2016 Sea-Doo GTX Limited 300
- 2016 Sea-Doo RXP-X 300
- 2016 Sea-Doo RXT-X 300
Validate your login